Eaton BladeUPS Power System ZP212100XXXX000

The Eaton BladeUPS Preassembled System is a truly turnkey solution for growing data center needs. Delivering up to 60 kW of redundant power from a single rack enclosure, Eaton has expanded the BladeUPS product offering and simplified it for easy customization, shipping and installation.

Product Type	Dual Conversion Online UPS
Brand Name	Eaton
Manufacturer	Eaton Corporation
Product Name	BladeUPS Power System
Product Line	BladeUPS
Manufacturer Part Number	ZP212100XXXX000
Manufacturer Website Address	http://www.eaton.com/EatonCom/Markets/NorthAmerica
Batteries	Sealed, Maintenance-free Valve-regulated Lead Acid (VRLA) User Replaceable Hot-swappable
Backup/Run Time	0.08 Hour 24 kW Full Load 0.22 Hour 12 kW Half Load
Height	81"
Width	24"
Depth	42"
Form Factor	Tower
Weight (Approximate)	994 lb
Receptacles	Hard Wire 4-wire 3PH + G
Plug/Connector Type	Hardwired
Interfaces/Ports	2 x RS-232
Input Voltage Range	208 V AC Nominal 180 V AC to 265 V AC
Load Capacity	24 kW
Input Voltage	220 V AC
Output Voltage	120 V AC Nominal 208 V AC Nominal 180 V AC to 228 V AC
Network Management	Optional
Package Contents	BladeUPS Power System 1 x S-Series Rack on a Heavy-duty Shipping Pallet with Unloading Ramp BladeUPS Parallel Bar and Wireway 2 x BladeUPS Modules Intelligent Power Software CD BladeUPS Installation and User Manual Rack Hardware Kit Front and Rear Rack Aesthetic Plates
Limited Warranty	1 Year

General Information
Product Type	Dual Conversion Online UPS
Brand Name	Eaton
Manufacturer	Eaton Corporation
Product Name	BladeUPS Power System
Product Line	BladeUPS
Manufacturer Part Number	ZP212100XXXX000
Manufacturer Website Address	http://www.eaton.com/EatonCom/Markets/NorthAmerica
Battery Information
Batteries	Sealed, Maintenance-free Valve-regulated Lead Acid (VRLA) User Replaceable Hot-swappable
Backup/Run Time	0.08 Hour 24 kW Full Load
Backup/Run Time	0.22 Hour 12 kW Half Load
Physical Characteristics
Height	81"
Width	24"
Depth	42"
Form Factor	Tower
Weight (Approximate)	994 lb
Technical Information
Receptacles	Hard Wire 4-wire 3PH + G
Plug/Connector Type	Hardwired
Interfaces/Ports	2 x RS-232
Power Description
Input Voltage Range	208 V AC Nominal
Input Voltage Range	180 V AC to 265 V AC
Load Capacity	24 kW
Input Voltage	220 V AC
Output Voltage	120 V AC Nominal
Output Voltage	208 V AC Nominal
Output Voltage	180 V AC to 228 V AC
Management
Network Management	Optional
Miscellaneous
Package Contents	BladeUPS Power System 1 x S-Series Rack on a Heavy-duty Shipping Pallet with Unloading Ramp BladeUPS Parallel Bar and Wireway 2 x BladeUPS Modules Intelligent Power Software CD BladeUPS Installation and User Manual Rack Hardware Kit Front and Rear Rack Aesthetic Plates
Warranty
Limited Warranty	1 Year