Peerless-Av PLA Series Articulating Wall Arm For 37" to 80" Displays PLA50-UNLP

Plasma Screens: 32" - 50"

• Articulating Wall Arm
• 1 x Wall plate
• 1 x Tilt-roll assembly
• 1 x Arm assembly
• 1 x Wall support arm axle
• 3 x Vinyl trim
• 8 x Screw bolt (M10 x 1.5 x 15 mm )
• 1 x Nylon washer (.505 x .75 x .062" )
• 1 x Tilt adjustment knob
• 1 x Carriage bolt (3/8"-16 x 3.25")
• 2 x Delrin washer (1.525 x 2 x .062")
• 1 x Socket head cap screw ( 8-32 x .375")
• 8 x Plastic finishing cap
• 1 x Holding pin
• 1 x Retainer plug
• 6 x Wood screw (5/16 x 3")
• 6 x Washer (.250 x 1 x .068")
• 1 x Allen wrench (9/64")
• 4 x Cable management clips
• 4 x Cable tie
• 1 x Polyester mesh sleeve (36")
• 1 x Allen wrench (6 mm)
• 1 x Adapter bracket
• 2 x Shallow adapter bracket
• 2 x Deep adapter bracket
• 1 x Allen wrench
• Phillips Adapter Bracket Fasteners:
• 4 x (M6 x 20 mm)
• 4 x (M6 x 30 mm)
• 6 x Multi-washer
• 6 x (M8 x 16 mm)
• 4 x (M8 x 40 mm)
• 6 x (M4 x 12 mm)
• 4 x (M4 x 25 mm)
• 4 x (M5 x 12 mm)
• 4 x (M5 x 25 mm)
• 4 x (M6 x 12 mm)
• 4 x (M6 x 25 mm)
• 4 x (I.D. 5.6 mm )
• 4 x (M8 x 25 mm)
• 4 x (I.D. 8.7 mm )